Hotline:0769-89784060
  • Bad reasons: the vulcanizing agent does not roll evenly during the mixing of raw materials

    Bad reasons: the vulcanizing agent does not roll evenly during the mixing of raw materials

    Published:2020/08/27

    Bad reasons: the vulcanizing agent does not roll evenly during the mixing of raw materials, the curing temperature and time are not enough, or the temperature is too high. Die bias pressure, exhaust is not enough.

  • So silica gel kitchenware is popular on the mainstream dining table for more than ten years

    So silica gel kitchenware is popular on the mainstream dining table for more than ten years

    Published:2020/08/27

    So silica gel kitchenware is popular on the mainstream dining table for more than ten years, so as a new born silicone kitchenware, what advantages does it have compared with the previous material kitchenware, which can make it gradually popular on people's dining table
    Advantages of silicone kitchenware:

  • There is a question: can silica gel kitchenware be poisoned every day?

    There is a question: can silica gel kitchenware be poisoned every day?

    Published:2020/08/27

    Will silica gel kitchenware cause harm to people after long-term use:Silica gel kitchenware made by manufacturers of silica gel kitchenware has become common in daily life. Since it can be circulated in the market, the quality of its products must meet the relevant national standards. Unless the manufacturers of silica gel kitchenware use non-conforming raw materials in the production process, it will lead to product safety accidents. Therefore, if you want to purchase silicone kitchenware, find a regular manufacturer of silicone kitchenware The silicone tableware of relevant regulations will not be poisoned.

  • Silicone mobile phone cover product has bubbles, cut open visible hollow or flocculent hollow.

    Silicone mobile phone cover product has bubbles, cut open visible hollow or flocculent hollow.

    Published:2020/08/27

    If the production process is the same and the blanking weight is the same, the size instability still occurs. The silica gel itself should be considered. The size of different batches of silica gel products is different.

  • What are the defective products of silica gel products and why

    What are the defective products of silica gel products and why

    Published:2020/08/27

    It is easy to solve the problem of poor size change of silica gel products. First, determine the formula and process, then measure the size, and then adjust the mold according to the size. If the mold size is not good, it is useless for you to adjust the formula. At present, many rubber factories are relatively single in analyzing problems, which should be comprehensively considered from the aspects of human, machine, material, ring, method and measurement.

Home
Tel
Contact